Salactol Gel

Salactol Wart Paint contains salicylic and lactic acids, which break down the keratin in the affected skin area and kill the virus that causes warts or verrucas.

It also softens hard skin, making removing with a pumice stone or emery board easier.

• Soak the affected area in warm water for 2 to 3 minutes
• Dry the area thoroughly, using your own towel if you have a wart or verruca.                   
• Gently rub away any loose, hard skin from the surface of the wart, verruca, corn or callus with an emery board or a piece of pumice stone.
• Unscrew the cap of the bottle and, using the applicator attached to the inside of the cap, carefully apply a few drops of the paint to the top of the wart, verruca, corn or callus
• If the treated area is on the sole of the foot, cover it with an adhesive plaster to help prevent the virus from spreading. Elsewhere, treated areas need not be covered.
• Always replace the cap of the bottle tightly after use.
• The length of treatment will vary depending on the size and resistance of the wart, verruca, corn or callus.

• Salactol contains volatile solvents (ether and ethanol). Keep away from open flames, sparks, or lit cigarettes.
• Allow the gel to dry completely before putting on shoes or clothing.
• The acid does not differentiate between warts and healthy skin. Applying to healthy surrounding skin will cause burning, inflammation, irritation, and potential scarring.
• The gel is toxic to mucous membranes and causes serious eye irritation. Never apply to the face, nose, mouth, anogenital regions, or on broken skin.
• Avoid inhaling the vapour as it may cause light-headedness.
• The gel may permanently damage clothing, fabrics, jewellery, and polished surfaces if spilled.

Lactic Acid 16.7%w/w
Salicylic Acid 16.7%w/w